High Power Servo Electric Control Wood Lathe Belt Sander Motor Sewing Machine

• Customization: Available
• Application: Industrial
• Operating Speed: High Speed
• Model NO.: 89BL110S55-3170TS0
• Excitation Mode: Compound
• Function: Driving
• Casing Protection: Protection Type
• Number of Poles: 4
• Structure and Working Principle: Brushless
• Type: Z4
• Brand: Shidai
• Voltage: 220V
• Transport Package: Paper
• Specification: 90X90X185
• Trademark: shidai
• Origin: China
• Package Size: 90.00cm * 90.00cm * 190.00cm
• Package Gross Weight: 5.000kg

Product Description

Product Description

Energy-Efficient Motors User Manual

SAFETY INSTRUCTIONS:

• Instruction and trial-run must be done by a professional technician.
• Ensure the grounded wire is working properly.
• Control box and motor cover are forbidden to open when power is turned on.
• Ensure power is off during the following operations:
  • When turning over the machine.

OPERATION PANEL INSTRUCTIONS:

Each key's purpose:

Company name: Beijing Shidai Chaoqun Robot Technology Co., Ltd.

KEY	SEWING MODEL	FUNCTION MODEL
F	Enter the parameter combination key	Combine with other keys to enter parameter setting mode, error recovery key
D	Switch the direction	Direction switch and confirm parameter Settings
+	speed-up	Key to add parameter and index.
-	speed-down	Key to reduce parameter and index.

Adjusting Technician Model Parameter

To adjust the technician model parameter, follow these steps:

1. Press key "F", then press key "+" once to display P-00 on the screen.
2. Press key "+" or "-" to select the desired parameter model number.
3. Press key "F" to enter the parameter, the screen will display the parameter.
4. Use key "+" or "-" to select the required parameter.
5. Press key "D" to save the parameter and exit.

Restore Factory Setting

To restore factory settings, follow these steps:

1. Press key "F", then press key "+" to display P-00 on the screen.
2. Press and hold key "D" for 3 seconds to reset to factory settings.

Technician Model Parameter Diagram

For a detailed diagram of the technician model parameter, please refer to the user manual provided by Beijing Shidai Chaoqun Robot Technology Co., Ltd.

PARAMETER CODE	DESCRIPTION	ADJUSTING SCOPE	FACTORY SETTING	REMARK
P-02	Direction of rotation	0: Reverse turn 1: Clockwise turn	1
P-04	Start speed	200-800rpm	250
P-05	Speed-up and slow-down	2-20	5
P-07	Switching boot Mode	0-1	0	0:rotary knob 1:button
P-08	Brake enable	0-1	0	0:disable 1:enable
P-10	Automatic run	0: normal sewing 1: automatic clearance run	0	Turn off the power,running stop
P-12	acceleration time	4-120	5
P-14	Maximum current limit	50-500	300

ERROR CODE	CONTENT	REASON
Er03	Motor hall or phase error	Nine plug not connected wall; Motor not installed well; Hall broken.
Er04	Lock-rotor protection	Motor overloaded; Motor is not well connected.
Er05	Hardware over-current protection	Motor overloaded; Signal wire badly connected or broken.
Er07	Serial port communication timeout error	The wire between display and main board is not good or main board broken.

Detailed Photos

Product Parameters