High Torque 12nm NEMA34 Closed-Loop Stepper Brake Motor Paired with Zdm-2ha860 Driver

• Customization: Available
• Application: CNC
• Speed: Within 1000rpm, Optimal Between 3-400rpm
• Model NO.: 86EBP181ALC-TK0B+ZDM-2HA860
• Number of Stator: Two-Phase
• Excitation Mode: HB-Hybrid
• Function: Driving
• Number of Poles: 4
• Operate Mode: Pulse Control
• Type: Permanent Magnet
• Certification: CE
• Brand: Shidaichaoqun
• Phase: 2
• Warranty: 3months-1year
• Current / Phase: Peak 6A
• Dielectric Strength: AC 500V/ 1min / 5mA Max.
• Phase Inductance: 7.2 Mh±20%(1kHz 1V RMS)
• Insulation Class: B
• Phase Resistance: 0.69 Ω±0.1(20ºC)
• Motor+Drive,Gross Weight of The Product: 7.5kg
• Holding Torque: 12.5 N.M
• Number of Phase: 2
• Step Angle: 1.8°
• Braking Torque: 4.5nm
• Transport Package: Polyfoam, . Cardboard Carton
• Specification: torque 12nm, body length 222mm
• Trademark: times brilliant
• Origin: Beijing, China
• HS Code: 8501310000
• Package Size: 39.00cm * 24.00cm * 23.00cm
• Package Gross Weight: 7.500kg

Product Description

high torque 12NM nema34 closed-loop stepper brake motor paired with Zdm-2ha860 driver

 

 

Note: the motor with magnetic ,so magnetic inspection fee will be incurred during transportation. Please contact shop assistant to supplement it.large quantities can dispense with it

 

 

 

Related stepper driver

 

 

Introduction
 

        The ZDM-2HA860 is a new hybrid servo driver developed by our company based on more than ten years of experience in step and servo development,Using the latest DSP chip and vector closed loop control technology, the problem of step loss of open-loop stepper motor can be completely overcome,At the same time, it can obviously improve the high-speed performance of the motor, reduce the heating degree of the motor and reduce the vibration of the motor, so as to improve the machining speed and precision of the machine and reduce the energy consumption of the machine.In addition, when the motor is continuously overloaded, the driver will output an alarm signal, with the same reliability as the ac servo system.In addition, when the motor is continuously overloaded, the driver will output an alarm signal, with the same reliability as the ac servo system.

Technical Characteristics

1.New 32 - b motor it control DSP chip is adopted;

2.Advanced vector closed - loop control technology is adopted;

3.With trapezoidal wave test function;

4.Static current and dynamic current can be set arbitrarily (0--7.2A range);

5.Drive nema34 series 2phase hybrid closed loop stepper motor;

6.The optocoupler isolates the differential signal input;

7.The impulse response frequency can reach up to 200KHZ;

8.Arbitrary subdivision (range 1--51200);

9.With over - current, over - voltage, over - heat and tracking error protection;

Electrical indicators

Mechanical installation dimension drawing (unit :mm)

The Driver Interface and Wiring

Motor and power input port

Encoder Signal Input port

Control port

wiring
NOTE:This is a wiring diagram of another similar style ZDM-2HA865 with motor and controller, and its wiring method is basically the same as ZDM-2HA860

Our Services

Company Information

Our Certificate