Brushless Servo Motor 220V 2.2kw with Controller

• Application: Industrial
• Speed: High Speed
• Number of Stator: Three-Phase
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: 89BL130S220-3160TS0
• Function: Control
• Casing Protection: Protection Type
• Number of Poles: 8
• Starting Mode: Direct on-line Starting
• Brand: Times Brilliant
• Origin: Beijing
• Package Size: 30.00cm * 25.00cm * 20.00cm
• Package Gross Weight: 5.000kg
• Lead Time: 5 days (1 - 10 Pieces) ; To be negotiated ( > 10 Pieces)

Product Description

Product Description

brushless servo motor 220V 2.2KW with controller for Grinder or Milling machine

Product Parameters

Brushless servo motor manual

 

1. SAFETY INSTRUCTIONS:

1.1. Instruction and trial-run must be done by professional technician;

1.2. Pls ensure the grounded wire working well;

1.3. Control box and motor cover are forbidden to open when power turn-on;

1.4. Pls Ensure power off during below operations:

a) When turning over the machine.

2. OPERATION PANEL INSTRUCTIONS:

2.1. Each Key purpose:

KEY	SEWING MODEL	FUNCTION MODEL
F	Enter the parameter combination key	Combine with other keys to enter parameter setting mode, error recovery key
D	Switch the direction	Direction switch and confirm parameter Settings
+	speed-up	Key to add parameter and index.
-	speed-down	Key to reduce parameter and index.

 

 

2.2. ADJUSTING TECHNICIAN MODEL PARAMETER:

a) Press key"F",meanwhile press key"+"once,the screen will show P-00;

b) Press key"+"or"-"till the parameter model number required;

c) Press key"F"into parameter,the screen will show the parameter;

d) Press key"+"or"-"till the required parameter;

e) Press key"D"to save parameter and quit.

2.3. RESTORE FACTORY SETTING:

   Press key"F",meanwhile press key"+",the screen will show P-00;Then press key"D" 3 seconds,it will resource factory settings.

3. TECHNICIAN MODEL PARAMETER DIAGRAM:

PARAMETER CODE	DESCRIPTION	ADJUSTING SCOPE	FACTORY SETTING	REMARK
P-02	Direction of rotation	0: Reverse turn 1: Clockwise turn	1
P-04	Start speed	200-800rpm	250
P-05	Speed-up and slow-down	2-20	5
P-07	Switching boot Mode	0-1	0	0:rotary knob 1:button
P-08	Brake enable	0-1	0	0:disable 1:enable
P-10	Automatic run	0: normal sewing 1: automatic clearance run	0	Turn off the power,running stop
P-12	Stop time	4-120	5
P-14	Maximum current limit	300-600	350

 

4. FAULT SOLUTION:

 

ERROR CODE	CONTENT	REASON
Er03	Motor hall or phase error	Nine plug not connected wall; Motor not installed well; Hall broken.
Er04	Lock-rotor protection	Motor overloaded; Motor is not well connected.
Er05	Hardware over-current protection	Motor overloaded; Signal wire badly connected or broken.
Er07	Serial port communication timeout error	The wire between display and main board is not good or main board broken.

we have the items in stock , look forward to your inquiry