| Customization: | Available |
|---|---|
| Type: | Hybrid |
| Voltage: | 24VDC |
|
Still deciding? Get samples of US$ 30/Set
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product related information
China Supplier NEMA 23 Hybrid Stepping Motor and driver set 2.8nm 3A Digital control Milling Flat Shaft Diameter 8mm CNC Control System Engraving machine
| Basic Parameters | |
| Type | Mixed Stepper |
| Motor Model | 57HBP112AL4 |
| Phase | 2 |
| The Temperature Rise | 80K Max |
| Environment Temperature | -40 + 55 |
| Insulation Grade | B Class |
| Insulation Resistance | 100MΩ |
| Insulation Strength | 1000VAC 50Hz 1mA/Min |
| Electrical Parameters | |
| Step Angle | 1.8° |
| Torque | 2.8Nm |
| Current | 4.2A |
| Power Supply Voltage | 24V |
| Resistance | 0.85Ω |
| Inductance | 3.8mH |
| Adapter Driver | DM542 |
| Defects Liability Period | 2 years |
| Mechanical Parameters | |
| Length | 112mm |
| Hole Dist | 30mm |
| Shaft L | 21mm |
| Shaft D | 8mm |
| Shaft | D-shaft |
| Load Wire | connectors |
| Wire No. | 4 |
| Weight | 1.7Kg |
Characteristics:
1.Low price, high speed torque
2.Supply voltage up to 50V
3.Maximum output current can reach 4.2A
4.Three-state current control technology with low heating
5.Automatic halving of static current 0.4 S to 60 %
6.Two-phase stepper motor with 4, 6, 8 lines
7.Optical isolation differential signal input, maximum pulse response frequency up to 200 KHz
8.Subdivision accuracy 2,4,5,8,10,16,20,25,32,40,50,64,100,125,128 optional
9.Small size(118 x 75.5 X 34mm)
10.Convenient current setting, optional at eight
11.Four dials for 15 steps
12.Protection functions such as overpressure, short circuit etc..
13.Bipolar constant current PWM driver output
14.Suitable for all kinds of small and medium scale automation equipment and instruments, such as engraving machine, medical creep pump,
15.Label striking machine, cutting machine, laser photo arrangement, plotter, CNC machine tool, automatic assembly equipment
16.Wait a minute. It works well in devices where users expect small noise and high speed
Click to get your special discount
Electrical indicators:
| Parameter | Min | Typical value | Max | Unit |
| Output current(peak) | 1.0 | -- | 4.2 | A |
| Input power (V) | 20 | 24/36 | 48 | VDC |
| Control signal input current | 7 | 10 | 20 | MA |
| tep pulse frequency | 0 | -- | 200 | kHz |
| Insulation resistance | 500 | -- | -- | MΩ |
Strengthening heat dissipation
(1) The reliable working temperature of the actuator is usually within 60 and the working temperature of the motor is
Within 80 °C;
(2) It is recommended to choose an automatic half current mode when using and to reduce the current automatically when the motor stops
60 % to reduce heating of motors and drives;
(3) When installing the drive, use vertical side mounting to make the heat dissipation teeth stronger
Air convection; When necessary, install fans near the drive to ensure forced heat dissipation
The drive works within a reliable operating temperature range.
Size:
|
Suitable Motor |
| Service |
){kind=link}